MATERIAL SAFETY DATA SHEET
NINHYDRIN 3,5%, Reagent
Catalogue number: 8556 / 2011.01.07
|
1. Hazardous ingredients Material or mixtures : Ninhydrin 3,5% (cas # 485-47-2) Toxicity : not applicable |
|
2. Physical data Boiling point : not available Vapor pressure : not available Vapor density : not available Solubility in water : Complete Appearance : liquid, clear, light yellow |
|
pH at 25 ̊ C : not available % volatile/volume : not available Evaporation rate : not available Odor : characteristic |
|
3. Fire and explosion hazard data Flash point : not applicable Ignition temperature : not applicable Extinguishing media : CO₂, dry chemical, water Special fire fighting procedures : not applicable
|
||||
|
4. Health hazard data and protection information Effects of overexposure : not applicable Carcinogenicity : not identified Eyes contact and skin contact: not irritant. Wear rubber gloves apron and safety goggles. Wash thoroughly with plenty running water at least 15 minutes. Call a physician. Inhalation: adequate ventilation. Remove to fresh air. If symptoms persist, call a physician. Ingestion : not applicable |
||||
|
5. Reactivity data Stability : stable Incompatible materials : not identified Hazardous decomposition products : None, if used as specified Hazardous polymerisation : not applicable |
||||
|
6. Spill, leak and precautions procedures Preventives measures: wipe up with damp sponge and rinse with water. Waste disposal method: This is not a hazardous product. Small spill may be rinsed down drain with plenty of water. Follow all local environmental disposal regulation. |
||||
|
7. Special protection information Handling and storing: Follow standards controls. Store in a dark cool room between 15-30 ̊C. Keep container tightly closed. No special regulations required. |
||||
|
The above information is correct but do not purport to be all inclusive and shall be used as a guide. QUÉBACT shall not be held liable for any damage resulting from handling or contact with the above product. |
||||